http://www.tracopower.com features smallest encapsulated 30 w converter 2 x 1 x 0.4 shielded metal package ultra wide 4:1 input voltage range single- dual- and triple output models very high effciency up to 91 % operating temp. range C40c to +75c i/o isolation 1500 vdc over temperature and short circuit protection remote on/off adjustable output voltage 3-year product warranty dc/dc converters ten 30win series, 30 watt page 1 of 4 order code input voltage range output 1 output 2 output 3 effciency typ. ten 30-2407win 1.5 vdc / 8.5 a 80 % ten 30-2409win 2.5 vdc / 8.0 a 83 % ten 30-2410win 3.3 vdc / 7.5 a 86 % ten 30-2411win 5.1 vdc / 6.0 a 88 % ten 30-2412win 12 vdc / 2.5 a 89 % ten 30-2413win 15 vdc / 2.0 a 89 % ten 30-2421win 9 C 36 vdc + 5 vdc / 3.0 a C5 vdc / 3.0 a 88 % ten 30-2422win (24 vdc nominal) +12 vdc / 1.25 a C12 vdc / 1.25 a 87 % ten 30-2423win +15 vdc / 1.0 a C15 vdc / 1.0 a 87 % ten 30-2433win 3.3 vdc / 5.0 a +12 vdc / 0.42 a C12 vdc / 0.42 a 86 % ten 30-2434win 3.3 vdc / 5.0 a +15 vdc / 0.33 a C15 vdc / 0.33 a 86 % ten 30-2431win 5 vdc / 4.0 a +12 vdc / 0.42 a C12 vdc / 0.42 a 88 % ten 30-2432win 5 vdc / 4.0 a +15 vdc / 0.33 a C15 vdc / 0.33 a 88 % ten 30-4807win 1.5 vdc / 8.5 a 80 % ten 30-4809win 2.5 vdc / 8.0 a 84 % ten 30-4810win 3.3 vdc / 7.5 a 86 % ten 30-4811win 5.1 vdc / 6.0 a 88 % ten 30-4812win 12 vdc / 2.5 a 90 % ten 30-4813win 15 vdc / 2.0 a 91 % ten 30-4821win 18 C 75 vdc + 5 vdc / 3.0 a C5 vdc / 3.0 a 88 % ten 30-4822win (48 vdc nominal) +12 vdc / 1.25 a C12 vdc / 1.25 a 88 % ten 30-4823win +15 vdc / 1.0 a C15 vdc / 1.0 a 88 % ten 30-4833win 3.3 vdc / 5.0 a +12 vdc / 0.42 a C12 vdc / 0.42 a 86 % ten 30-4834win 3.3 vdc / 5.0 a +15 vdc / 0.33 a C15 vdc / 0.33 a 86 % ten 30-4831win 5 vdc / 4.0 a +12 vdc / 0.42 a C12 vdc / 0.42 a 88 % ten 30-4832win 5 vdc / 4.0 a +15 vdc / 0.33 a C15 vdc / 0.33 a 88 % models the ten 30win series is a family of high performance 30w dc-dc converter modules featuring ultra wide 4:1 input voltage ranges in a compact low profle case with industry-standard footprint. standard features include remote on/off, output voltage trimming, over voltage protection, under voltage lockout, over temperature and short circuit protection. typical applications for these products are battery operated equipment and distributed power architectures in communication and industrial electronics, every - where where isolated, tightly regulated voltages are required and space is limited on the pcb. cb scheme ul 60 95 0- 1
http://www.tracopower.com input specifications input current at no load 12 & 15 vdc / 12 & 15 vdc models, 24 v: 30 ma typ. (nominal input) other models, 24 v: 100 ma typ. 12 & 15 v models, 48 v: 15 ma typ. other models, 48 v: 55 ma typ. input current at full load 1.5 vdc model, 24 v: 700 ma typ. (nominal input) 2.5 vdc model, 24 v: 1050 ma typ. 3.3 vdc model, 24 v: 1250 ma typ. other models, 24 v: 1500 ma typ. 1.5 vdc model, 48 v: 350 ma typ. 2.5. vdc model, 48 v: 520 ma typ. 3.3 vdc model, 48 v: 630 ma typ. other models, 48 v: 750 ma typ. ) start-up voltage / under voltage lockout 24 v models: 9 vdc / 8 vdc (typ.) 48 v models: 18 vdc / 16 vdc (typ.) surge voltage (100 msec. max.) 24 v models: 50 vdc max. 48 v models: 100 vdc max conducted noise (input) en 55022 class a with input capacitor 24 v models: 4.7 f / 50 v 1812 mlcc 48 v models: 2.2 f / 100 v 1812 mlcc ) output specifications voltage set accuracy 1 % (5 % for auxilary outputs) output voltage adjustment (only for single output models) 10 % with external resistor (see page 3) regulation C input variation single- and dual output models: 0.2 % max. triple output models: 1 % / 5 % max. (main / auxilary) C load variation single output models: 0.5 % max. (0 C 100 %) dual output models balanced load: 1 % max. (0 C 100 %) dual output models unbalanced load: 5 % max. (25 / 100 %) triple output models (main/auxiliary): 1 % max. / 5 % max. (10 C 100 %) minimum load single- and dual output models: not required triple output models: 10% of rated max current on each output (operation at lower load condition will not damage the converters. however, they may not meet all listed specifications) temperature coefficient 0.02 %/k max. ripple and noise (20 mhz bandwidth) 1.5 v C 5.1 vdc models: 100 mvpk-pk. typ. triple output models: 50 / 75 mvpk-pk typ. (main / auxilary) other models: 150 mvpk-pk typ. start up time (nominal vin and constant resistive load) 30 ms typ. transient response time (25% load change) 250 s typ. short circuit protection indefinite (automatic recovery) over load protection 150 % of iout max. typ. thermal shutdown at +115c typ. over voltage protection 1.5 vdc models: 2.0 v 2 . 5 vdc models: 3.3 v 3.3 vdc models: 3.9 v 5.1 vdc models: 6.2 v 12 vdc models: 15 v 15 vdc models: 18 v capacitive load output models 1.5 C 3.3 vdc models : 20000 f max. 5.1 vdc models : 14000 f max. 12 & 15 vdc models: 2000 f max. 5 vdc models: 3000 f max. other dual output models: 1300 f max. 3.3 vdc triple output models: 15000 / 220 f max. (main / auxilary) 5.1 vdc triple output models: 8000 / 220 f max. (main / auxilary) dc/dc converters ten 30win 30 watt all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. page 2 of 4
http://www.tracopower.com dc/dc converters ten 30win 30 watt general specifications temperature ranges C operating C40c to +75c C case temperature +105c max. C storage C55c to +125c derating 3.5 %/k above +60c humidity (non condensing) 95 % rel. h max. thermal inpedance C natural convection 12c/w C natural convection with heat sink 10c/w reliability, calculated mtbf single- and dual output models: 435000 h (mil-hdbk-217f, at +25c, ground benign) triple output models: 320000 h isolation voltage (60 sec.) C input / output 1500 vdc isolation resistance C input / output >1000 m ohm isolation capacitance C input / output 1500 pf max. remote on/off C on: 3.0 to 12 vdc or open circuit. C off: 0 to 1.2 vdc or short circuit pin 3 and pin 2 C off idle current: 3 ma max. switching frequency (pulse width modulation pwm) single- and dual output models: 430 khz typ. triple output models: 400 khz typ. thermal shock, mechanical shock & vibration en 61373, mil-std-810f C test conditions www.tracopower.com/products/mil810.pdf safety standards ul 60950-1, iec/en 60950-1 safety approvals C ul/cul www.ul.com -> certifications -> file e188913 output voltage adjustment (for single output models only) rd trim +vout ru trim - vout trim up trim down page 3 of 4 nominal output voltage at open trim input! physical specifications casing material copper, nickel plated baseplate material none conductive fr4 potting material epoxy (ul 94v-0 -rated) weight 31 g (1.1 o z ) soldering temperature max. 265c / 10 sec. environmental compliance C reach www.tracopower.com/products/ten30win-reach.pdf C rohs rohs directive 2002/95/ec ru [kohm] output 1.5 2.5 3.3v 5.1v 12v 15v +5% 0.56 4.3 6.8 5.1 43 47 +10% 0.051 0.33 0.75 0.75 4.3 1.8 rd [kohm] output 1.5 2.5 3.3v 5.1v 12v 15v C5% 0.68 6.2 8.2 6.2 56 56 C10% 0.062 0.75 0.62 0.82 5.6 2.2 application note: www.tracopower.com/products/ten30win-application.pdf
outline dimensions re v.0 6/12 dimensions in [mm], () = inch pin diameter: 1.0 0.1 (0.04 0.004) pin pitch tolerances: 0.25 (0.01) case tolerances: 0.5 (0.02) page 4 of 4 dc/dc converters ten 30win 30 watt specifcations can be changed any time without notice. bottom v iew 1 2 4 5 6 3 5.6 (0.22) 10.2 (0.4) 50.8 (2.0) 45.72 (1.8) 2.5 (0.1) 2.54 (0.1) 5.08 (0.2) 15.24 (0.6) 10.16 (0.4) 20.32 (0.8) bottom v iew 1 2 4 5 7 3 7.62 (0.3) 5.08 (0.2) 12.7 (0.5) 5.08 (0.2) 6 25.4 (1.0) 25.4 (1.0) pin single dual triple 1 +vin (vcc) +vin (vcc) +vin (vcc) 2 Cvin (gnd) Cvin (gnd) Cvin (gnd) 3 remote on/off remote on/off remote on/off 4 +vout 1 output 1 output 2 5 Cvout 1 common output 3 6 trim output 2 common 7 no pin no pin output 1 pin-out single- and dual output models 56.0 (2.2) max. 14.5 (0.57) 16.8 (0.66) max. conver ter heat-sink thermal pad clamp note: before attaching the heatsink, the product label on converter has to be removed for optimal performance. for volume orders we can supply the converters with heatsink already mounted. please contact us for a relative quotation. order code: ten-hs1 (cont.: heat-sink, thermal pad, 2 clamps) material: aluminum finish: anodic treatment (black) weight: 17g (0.60oz) without converter thermal impedance after assembling: 10 k/w heat-sink (option) triple output models jenatschstrasse 1 ch-8002 zurich switzerland t el. +41 43 311 45 11 fax +41 43 311 45 45 info@traco.ch www .tracopower .com
|
